SeppLeaf, the gilder's source
212-683-2840   |   sales@seppleaf.com   |   914-497-3549
LoginQuote Basket

GENUINE GOLD LEAF PACKS     •     GENUINE RIBBON LEAF     •     GENUINE SILVER LEAF     •     GENUINE PALLADIUM LEAF     •     PLATINUM LEAF     •     METAL LEAF     •     FOILS     •     FLAKES & SCHAIBIN     •     POWDERED & SHELL GOLD     •     PRODUCTS FOR GILDERS     •     GILDING TOOLS3583

Colnasize

Colnasize Concentrate: An easily prepared size/adhesive for the adhesion of gold and silver leaf to Kolner Insta-Clay and Burnishing Clays. Dissolve one measured teaspoon in two cups of luke-warm tap water to make gilder's liquor.

Colnasize Concentrate, 2.25oz @ seppleaf.com

Colnasize Concentrate, 2.25oz

      COL-2   •   Ounce   •   USA
An easily prepared size/adhesive for the adhesion of gold and silver leaf to Kolner Insta-Clay and Burnishing Clays. Disolve one measured teaspoon in two cups of lukewarm tap water to make gilder's liquor

Add to Quote Basket



Click here to read more about our Gilding Sizes (PDF)


Guidelines & Important Notes:

• Drying time to reach a proper gilding tack and open time for gilding vary based on temperature and humidity. Ideal conditions for application of all products are 65 to 75 degrees Fahrenheit and 40% to 60% relative humidity. Working under different conditions will affect the performance of all products.

• All sizes and other coatings should be stirred to combine all components in order to assure consistent results. Never shake materials and do not mix too vigorously as this may cause bubbles to form, affecting the finished surface.

• Use all materials at package consistency and only thin as recommended by the manufacturer.

• All materials may be applied with brush, roller or sprayer. An airless of HVLP spray equipment is recommended. Manufacturers' coverage guidelines should be followed carefully.

• Imitation gold leaf, copper, aluminum, silver in low karat gold leaf and 100% silver leaf are highly reactive and tarnish when left exposed. They can also react to components contained in sealers. Therefore discoloration can happen even after a sealer has dried, sometimes years later.

• Since the conditions and use of all products sold beyond the control of the manufacturers and SeppLeaf Products, the user assumes all risks associated with the use and performance of products purchased.

• Experimentation on a test object using all steps involved is recommended before working on the project.

• A gilder's experience and a working knowledge of materials and procedures are the best guide when approaching a project.

• Working with new products and procedures requires thorough testing to determine compatibility and final results.

SeppLeaf, the gilder's source

SeppLeaf Products provides an unparalleled array of genuine gold leaf, silver leaf, palladium leaf, and metal leaf; gilding tools and supplies.

SeppLeaf Products distributes Liberon premium finishes, Kolcaustico Venetian plaster, Mixol Universal Tints, and Gold Gourmet edible genuine gold and silver.

SeppLeaf Products is a corporate member of the Society of Gilders.

© 2024   SeppLeaf Products, Inc.

Contact Us


381 Park Ave. South #1301
New York, NY 10016

Phone 212-683-2840

sales@seppleaf.com

Contact Us

About Us