SeppLeaf, the gilder's source
212-683-2840   |   sales@seppleaf.com   |   914-497-3549
LoginQuote Basket
Kolcaustico Material Safety Data Sheet    
printer-friendly PDF file
MANUFACTURER'S NAME:
Clifton Adhesive, Inc.
Burgess Place
Wayne, NJ 07470
  INFORMATION AND EMERGENCY
TELEPHONE NUMBER:
201-694-0845

IN CASE OF SPILL OF LEAK INVOLVING THIS MATERIAL-CALL CHEMTREC 24 HOURS A DAY AT 800-424-9300

DATE OF PREPARATION:
06-27-07
  DOT. NAME & NO.:   NON-REGULATED
MATERIAL N.O.S.,
NON-HAZARDOUS NO ID#
SECTION I - PRODUCT IDENTIFICATION
PRODUCT NAME: KOLCAUSTICO   HMIS RATINGS:   H   F   P   P
        1   0   0   A
SECTION II - HAZARDOUS INGREDIENTS THE FOLLOWING
* ARE REPORTABLE UNDER SARA TITLE III
TOP FIVE AND/OR            
HAZARDOUS INGREDIENTS:   CAS NUMBER   ACGIH   OSHA PEL
        TLV
 
   
WATER
TSR # 1394250002-5260P
TSR # 1394250002-5259P
TSR # 1397250002-5168P
TSR # 1397250002-2520P
 
  7732-18-5   INFINITE   INFINITE
* * Above exposure limits are for air levels only. When skin contact occurs, overexposure may result though air levels are less than limits listed above.
SECTION III - PHYSICAL DATA
BOILING Point: 202 - 222 Deg F
VAPOR PRESSURE (mm Hg @ TEMP):
    21 - 27 @ 20 deg C. or 68 F.
SPECIFIC GRAVITY : 1.70
APPEARANCE AND ODOR: White liquid. Characteristics mild latex odor.
VOLATILE ORGANIC COMPOUND #/GAL.: 0
VOLATILE ORGANIC COMPOUND KG/LITER: 0
  VAPOR DENSITY: 1.00 - 1.40
 
WEIGHT/GAL: 13.4 - 13.8
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: N/A   METHOD USED: N/A
FLAMMABLE LIMITS IN AIR % LEL N/A   UEL N/A
AUTO IGNITION TEMPERATURE: N/A    
EXTINGUISH MEDIA: For dry film use CO2, foam, dry chemical
SPECIAL FIRE FIGHTING PROCEDURE: NIOSH/MSHA approved self-contained breathing apparatus should be used. Dry film will burn. Cool exposed surfaces with water spray.
USUAL FIRE AND EXPLOSION HAZARD: N/A
SECTION V - REACTIVITY DATA
INCOMPATIBILITY (MATERIALS TO AVOID): Water reactive materials such as metallic sodium and potassium & strong oxidizing agents ?>
STABILITY: Stable
INCOMPATIBILITY (MATERIALS TO AVOID): Water reactive materials such as metallic sodium and potassium & strong oxidizing agents.
CONDITIONS TO AVOID: Keep away from oxidizing agents. Coagulates when frozen, acidified, boiled.
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION VI - HEALTH HAZARD DATA
EFFECTS OF OVEREXPOSURE:
ACUTE: NA
CHRONIC: N/A
TARGET ORGANS:
SIGNS AND SYMPTOMS OF EXPOSURE: N/A
CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: N/A
CARCINOGENICITY: No

WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects and/or reproductive harm.

PRIMARY ROUTE(S) OF ENTRY: Eyes, Skin, Ingestion.
EMERGENCY AND FIRST AID PROCEDURES: Utilize the suggested methods listed below. In emergency situations notify a physician immediately.
SKIN: Wash with soap and water. Refer to physician if irritation persists.
EYES: Flush eyes abundantly with clean water and refer to physician.
INGESTION: Treat symptomatically and refer to physician.
EXCESSIVE INHALATION: N/A
SECTION VII - SPECIAL PRECAUTIONS
HANDLING & STORAGE: Store Away from heat of hot surfaces. Do not store below 40 Deg. F. Or above 90 Deg. F.
OTHER PRECAUTIONS: Note: Drums must be opened in a well-ventilated space. Product contains traces of Formaldehyde which may accumulate in levels above TLV in the air space above product.
SECTION VIII - SPILL OR LEAK PROCEDURES
FOR SPILLS OR RELEASED MATERIAL: Absorb spill in sand, earth, vermiculite, Oil-Dri, or Sol-Speed-Dri. Shovel absorbed material into steel container and cover.
WASTE DISPOSAL METHOD: Dispose of in accordance with federal, state, and local chemical and solvent waste disposal regulations.
SECTION IX - SAFE HANDLING AND USE INFORMATION
RESPIRATORY PROTECTION: N/A
VENTILATION: As specified
LOCAL EXHAUST: Remove vapors during processing.
MECHANICAL EXHAUST: Explosion-proof equipment.
SPECIAL: N/A
 
PROTECTIVE GLOVES: No gloves
EYE PROTECTION: Safety glasses
OTHER PROTECTIVE EQUIPMENT: N/A
HYGIENIC PRACTICES: Keep area clean. Clean up spills immediately. Practice good personal hygiene.

DISCLAIMER LIABILITY: Since conditions or methods of use are beyond our control - we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information contained in this MSDS is believed to be true and accurate but all statements or suggestions are made without warranty - expressed or implied regarding the accuracy of the information - the hazards connected with the use of the product, or the results to be obtained from the use thereof. Compliance with all federal, state and local laws and regulations remains the responsibility of the user.

USER'S RESPONSIBILITY: This MSDS cannot cover all possible situations which the user may experience during processing. You should examine each aspect of your operation and determine if additional precautions should be taken. All health and safety information contained in this MSDS should be provided to your employees or customers. It is your responsibility to use this information to develop appropriate work practices, guidelines and employee training programs for your operation.

SeppLeaf, the gilder's source

SeppLeaf Products provides an unparalleled array of genuine gold leaf, silver leaf, palladium leaf, and metal leaf; gilding tools and supplies.

SeppLeaf Products distributes Liberon premium finishes, Kolcaustico Venetian plaster, Mixol Universal Tints, and Gold Gourmet edible genuine gold and silver.

SeppLeaf Products is a corporate member of the Society of Gilders.

© 2024   SeppLeaf Products, Inc.

Contact Us


381 Park Ave. South #1301
New York, NY 10016

Phone 212-683-2840

sales@seppleaf.com

Contact Us

About Us