Products by Sepp Gilding Workshop

Basic Gilding Kits Contain: Gilding Size - 4oz, 600 Wet/Dry Paper, Natural Hair Brush, Cotton Gloves, Mixing Sticks, Book of Leaf

Basic Gilding Kits Contain: Gilding Size - 4oz, 600 Wet/Dry Paper, Natural Hair Brush, Cotton Gloves, Mixing Sticks, Book of Leaf

Basic Gilding Kits Contain: Gilding Size - 4oz, 600 Wet/Dry Paper, Natural Hair Brush, Cotton Gloves, Mixing Sticks, Book of Leaf

Gilding Project Kits Contain: Gilding Primer - 4oz., Leaf Adhesive - 4oz., Acrylic Clear Coat - 4oz., Chessecloth & Mixing Sticks, Natural Hair Brush, 600 Wet/Dry Paper, Cotton Gloves, Book of Leaf

Gilding Project Kits Contain: Gilding Primer - 4oz., Leaf Adhesive - 4oz., Acrylic Clear Coat - 4oz., Chessecloth & Mixing Sticks, Natural Hair Brush, 600 Wet/Dry Paper, Cotton Gloves, Book of Leaf

Gilding Project Kits Contain: Gilding Primer - 4oz., Leaf Adhesive - 4oz., Acrylic Clear Coat - 4oz., Chessecloth & Mixing Sticks, Natural Hair Brush, 600 Wet/Dry Paper, Cotton Gloves, Book of Leaf

Gilding Project Kits Contain: Gilding Primer - 4oz., Leaf Adhesive - 4oz., Acrylic Clear Coat - 4oz., Chessecloth & Mixing Sticks, Natural Hair Brush, 600 Wet/Dry Paper, Cotton Gloves, Book of Leaf

Gilding Project Kits Contain: Gilding Primer - 4oz., Leaf Adhesive - 4oz., Acrylic Clear Coat - 4oz., Chessecloth & Mixing Sticks, Natural Hair Brush, 600 Wet/Dry Paper, Cotton Gloves, Book of Leaf

Imitation Gold Roll 1" x 164'

Imitation Gold Roll 2" x 164'

Imitation Gold Roll 4" x 164'

Imitation Gold Roll 6" x 164'

Aluminum Roll 1" x 164'

Aluminum Roll 2" x 164'

Aluminum Roll 4" x 164'

Aluminum Roll 6" x 164'

Copper Roll 1" x 164'

Copper Roll 2" x 164'

Copper Roll 6" x 164'

The Mica Powder Kit contains to follow, step by step instructions, tools and materials to produce outstanding results. Additional powders, gilding adhesives, and clear topcoat may be purchased separately. Mica Powder Kit contains: 24 Mica Powder Colors in re-sealable, clear plastic bags Gilding Size - 4 oz. Leaf Adhesive - 4 oz. Acrylic Clear Coat (Gloss) - 4 oz. (2) Natural Hair Brush Cheesecloth & Mixing Sticks Complete Instructions

Water Gilding Kit includes: 1 Book 22 Karat Genuine Gold Leaf (25 leaves, 3.3/8" x 3.3/8") Approximately 2 square feet of material 90 grams Pebble Rabbit Skin Glue 200 grams Red Gilder's Clay 200 grams Yellow Gilder's Clay 1 pound French Whiting for Gesso 600 Wet/Dry Sandpaper 4 Wood Mixing Sticks

Gilding Tool Kit includes: Gilder's Tip Gilder's Mop (2) 3/4" Brushes Oil Free Steel Wool Vaseline Petroleum Jelly Gilder's Pad Gilder's Knife Agate Burnisher Wad of Cotton Paint Stirrers Fine Sandpaper

Rottenstone is a very fine abrasive for polishing (can be used wet or dry). It is ideal for producing an aged look on gilded surfaces. It is generally sold as a finer powder and used for a more glossy polish after an initial treatment with coarser pumice powder. It can also be used to sand varnished surfaces and to buff stains out of wood.

Pumice Powder is used as an abrasive for rubbing gilded surfaces at achieve an antiqued worn effect. It is also used to degrease your gilders knife and gilders pad. It can be mixed with water or oils to make a paste which is then used to polish surfaces.

Traditional Dry Cone Burnishing Clay must be crushed and mixed with distilled water and rabbit skin glue to make a bole paste, which is later applied to a gesso prepared surface to form an even base for burnishing/polishing Gold and Silver leaf.

Traditional Dry Cone Burnishing Clay must be crushed and mixed with distilled water and rabbit skin glue to make a bole paste, which is later applied to a gesso prepared surface to form an even base for burnishing/polishing Gold and Silver leaf.

Traditional Dry Cone Burnishing Clay must be crushed and mixed with distilled water and rabbit skin glue to make a bole paste, which is later applied to a gesso prepared surface to form an even base for burnishing/polishing Gold and Silver leaf.

Traditional Dry Cone Burnishing Clay must be crushed and mixed with distilled water and rabbit skin glue to make a bole paste, which is later applied to a gesso prepared surface to form an even base for burnishing/polishing Gold and Silver leaf.

Traditional Dry Cone Burnishing Clay must be crushed and mixed with distilled water and rabbit skin glue to make a bole paste, which is later applied to a gesso prepared surface to form an even base for burnishing/polishing Gold and Silver leaf.

Traditional Dry Cone Burnishing Clay must be crushed and mixed with distilled water and rabbit skin glue to make a bole paste, which is later applied to a gesso prepared surface to form an even base for burnishing/polishing Gold and Silver leaf.

The finest Florence Rouge (Whiting/Calcium Carbonate/Chalk) from Vermont sold in 1,5, 10, 20, 55 pound packages for the making of gesso. Mix with Rabbit Skin/Hide Glue to create Gesso for traditional water gilding.

Rabbit skin glue is produced from depilated leather parts of rabbits. These glues have extremely high cohesion. Rabbit skin glue typically has an odor and is delivered in the form of cubes.

Basic Verre Églomise Kit for Marybeth Ting's Workshop. This kit features all the materials needed to get started with Verre Eglomise. Marybeth's workshop will introduce the basics of verre églomisé by exploring the entire process from start to finish. Students will learn the preparation and tools required, how to apply genuine gold leaf, and explore a variety of methods. Visit societyofgilders.org to sign up!